URSA NANO ART 18W 800mAh POD
Check out the Lost Vape URSA Nano Art 18W Pod Kit, offering a rechargeable 800mAh, 5-18W output range, and satisfying vapor from the UB Mini Coil Series. Adopting a transparent chassis, the URSA Nano Art Pod System is perfect for those that love this type of styling, similar to the Lost Vape Orion Art Pod System. In addition, the URSA Nano Art 18W Pod System relies on a draw-activated firing mechanism, eliminating the necessity of adjustment or operational buttons.
Furthermore, the Lost Vape URSA Nano Pod System is equipped with ann integrated 800mAh battery, rechargeable via Type-C Port found on the base of the device. Holding up to 2.5mL within the empty URSA cartridge, the URSA Nano Art relies on the Lost Vape UB Mini S Coil Series to form delicious clouds of flavored vapor.
It has a built-in 800mAh battery and fast charges via the Type-C USB on the bottom of the device.
The coil simply pushes up into the middle of the bottom of the pod, making sure it is flush with the bottom plastic. At the front of the pod is a rubber grommet, simply pull this back and fill the pod with e-liquid via the fill hole. Wait 5 minutes (unless you are re-filling) for the e-liquid to saturate the coil cotton to avoid dry burning when first vaping.
The pod holds a maximum e-liquid capacity of 2.5ml and even though 50% of the pod sits in the Ursa Nano Art device, you can clearly see current e-liquid levels due to the clear body of the device and the smoked pod.
The Ursa Nano Art device uses replaceable coils for the pod. There are 2 coils supplied in the kit which are the UB Mini Coils by Lost Vape in 1.0Ω and 0.8Ω resistance. Both of these ranges make the device perfect for mouth-to-lung vaping.
There isn’t a fire button or display screen on the Ursa Nano Art and it is literally a plug-and-play simple vape device. The pod just drops into the top and power is automatically smart set to the resistance of the coil in the pod, up to a maximum of 18W output. Then it just uses an auto-draw function on the vape.
There is an LED within the bottom of the device that will light when vaping and charging. Due to the coloured PCTG on the Ursa Nano Art, it will illuminate the whole device in the colour of the kit purchased. Being regulated with the Lost Vape Quest chipset, the LED will also indicate along with any safety functions. For example when in a low battery the LED will flash 10 times, or 25 times to indicate Too Hot.
The device has a clear (semi-opaque-coloured) body with a design panel behind it. The design on this colour device is called Pachino Art and has ‘Ursa’ down the middle on both the front and back of the device. Printed at the bottom of the design panelling is ‘Ursa Nano Art’ with ‘Lost Vape’ on the other side. This Ursa Nano Art being the Aqua Blue colour but there are another 5 colours/designs available.
- Aqua Blue x Pachinko Art
- Babe Pink x Pachinko Art
- Lime Green x Pachinko Art
- Blue Stella x Kaleido Art
- Deep Space x Kaleido Art
- Yellow Sands x Kaleido Art
Lost Vape URSA Nano Art 18W Pod Kit Features:
- Dimensions: N/A
- Battery Capacity: Built-In 800mAh
- Wattage Range: 5-18W
- Voltage Range: 3.2-4.2V
- Resistance Range: 0.8-1.0ohm
- Chassis Material: PCTG + Silicone
- Charging: Type-C Port
- Operation: Draw-Activated
- Pod Series: URSA Nano
- Fill System: Side Fill System
- Pod Material: PCTG
- Pod Capacity: 2.5mL
- Pod Connection: Magnetic Pod Connection
- Coil Installation: Press-Fit Connection
- Coil Support: UB Coil Series
- Compatible with URSA Cartridges
The device and contents come in a sealed Blue cardboard box. The colour may be dependent on the colour device chosen. On the top of the box is the printed Lost Vape branding and the device title, along with a large embossed image of the pod kit in the middle. The right side of the box has printed branding and the Lost Vape slogan, while the left side of the box is 6 printed key features of the kit.
Printed on the bottom of the box are the contents, warnings, contact info and social media info for Lost Vape. Underneath is the printed bar code and colour of the device. There is also a scratch-for-authenticity label.
- 1 URSA Nano Art Pod System
- 1 URSA Empty Cartridge
- 1 1.0ohm UB Mini S2 Coil
- 1 0.8ohm UB Mini S2 Coil
- 1 Type-C USB Cable
- 1 User Manual
- 1 Warranty Card